ГОСТ Р ИСО 10816-21-2021. Национальный стандарт Российской Федерации. Вибрация. Контроль состояния машин по результатам измерений вибрации на невращающихся частях. Часть 21. Ветрогенераторы горизонтально-осевые с коробкой передач

[1]

ISO 2631-1, Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration - Part 1: General requirements

[2]

ISO 4866, Mechanical vibration and shock - Vibration of fixed structures - Guidelines for the measurement of vibrations and evaluation of their effects on structures

[3]

ISO 5348, Mechanical vibration and shock - Mechanical mounting of accelerometers

[4]

ISO 8041, Human response to vibration - Measuring instrumentation

[5]

ISO 8579-2, Acceptance code for gears - Part 2: Determination of mechanical vibrations of gear units during acceptance testing

[6]

ISO 13372, Condition monitoring and diagnostics of machines - Vocabulary

[7]

ISO 13373-1, Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 1: General procedures

[8]

ISO 13373-2, Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 2: Processing, analysis and presentation of vibration data

[9]

ISO 16079 (all parts), Condition monitoring and diagnostics of wind turbines

[10]

IEC 60034-14, Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity

[11]

IEC 60050-415, International Electrotechnical Vocabulary - Part 415: Wind turbine generator systems

[12]

IEC 61400-4, Wind turbines - Part 4: Design requirements for wind turbine gearboxes

[13]

IEC/TS 61400-13, Wind turbine generator systems - Part 13: Measurement of mechanical loads

[14]

DIN 4150-3, Vibration in buildings - Part 3: Effects on structures

[15]

VDI 3832, Measurement of structure-borne sound of rolling element bearing in machines and plants for evaluation of state condition

[16]

VDI 3839 part 1:2001-03, Instructions on measuring and interpreting the vibrations of machines - General principles

[17]

VDI 3839 part 2, Instructions on measuring and interpreting the vibrations of machines - Vibration patterns for excitation arising from unbalance, incorrect assembly, bearing faults and damage to rotating components

[18]

Gellermann Th., & Walter G. Anforderungen an Condition-Monitoring-Systeme Windenergieanlagen. Allianz-Zentrum Technik, 2003

[19]

K., & Dalhoff P. Richtlinie die Zertifizierung von Condition-Monitoring-Systemen Windenergieanlagen. Germanischer Lloyd Industrial Services. 2013, Available at www.dnvgl.com

[20]

ISO 10816-1 <*>, Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 1: General guidelines

[21]

ISO 10816-3:2009 <**>, Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ

УДК 534.322.3.08:006.354

ОКС 17.160

Ключевые слова: ветроэнергетические установки, ветрогенераторы, вибрация, измерения, контроль вибрационного состояния