ГОСТ 34100.1-2017/ISO/IEC Guide 98-1:2009. Межгосударственный стандарт. Неопределенность измерения. Часть 1. Введение в руководства по выражению неопределенности измерения

[1]

BELL, S. Measurement Good Practice Guide No. 11. A Beginner's Guide to Uncertainty of Measurement. Tech. rep., National Physical Laboratory, 1999

[2]

BERNARDO, J., AND SMITH, A. Bayesian Theory. John Wiley & Sons, New York, USA, 2000

[3]

BIPM, IEC, IFCC, ILAC, ISO, IUPAP, IUPAC, AND OIML. Evaluation of measurement data - Applications of the least-squares method. Joint Committee for Guides in Metrology, JCGM 107 <1>

[4]

BIPM, IEC, IFCC, ILAC, ISO, IUPAP, IUPAC, AND OIML. Evaluation of measurement data - Concepts and basic principles. Joint Committee for Guides in Metrology, JCGM 105 <1>

[5]

BIPM, IEC, IFCC, ILAC, ISO, IUPAP, IUPAC, AND OIML. Evaluation of measurement data - Supplement 2 to the "Guide to the expression of uncertainty in measurement" - Models with any number of output quantities. Joint Committee for Guides in Metrology, JCGM 102 <1>

[6]

BIPM, IEC, IFCC, ILAC, ISO, IUPAP, IUPAC, AND OIML. Evaluation of measurement data - Supplement 3 to the "Guide to the expression of uncertainty in measurement" - Modelling. Joint Committee for Guides in Metrology, JCGM 103 <1>

[7]

BIPM, IEC, IFCC, ILAC, ISO, IUPAP, IUPAC, AND OIML. Evaluation of measurement data - The role of measurement uncertainty in conformity assessment. Joint Committee for Guides in Metrology, JCGM 106 <1>

[8]

CASELLA, G.C., AND BERGER, R.L. Statistical Inference. Duxbury Press, Pacific Grove, 2001. Second Edition

[9]

COX, M.G. The evaluation of key comparison data. Metrologia 39 (2002), 589 - 595

[10]

COX, M.G., AND HARRIS, P.M. SSfM Best Practice Guide No. 6, Uncertainty evaluation. Tech. Rep. DEM-ES-011, National Physical Laboratory, Teddington, UK, 2006

[11]

COX, M.G., AND HARRIS, P.M. Software specifications for uncertainty evaluation. Tech. Rep. DEM-ES-010, National Physical Laboratory, Teddington, UK, 2006

[12]

DIETRICH, C.F. Uncertainty, Calibration and Probability. Adam Hilger, Bristol, UK, 1991

[13]

ELSTER, C. Calculation of uncertainty in the presence of prior knowledge. Metrologia 44 (2007), 111 - 116

[14]

EURACHEM/CITAC. Quantifying uncertainty in analytical measurement. Tech. Rep. Guide CG4, EURACHEM/CITEC, [EURACHEM/CITAC Guide], 2000. Second Edition

[15]

FELLER, W. An Introduction to Probability Theory and its Applications, Volume I. Wiley, 1968

[16]

FELLER, W. An Introduction to Probability Theory and its Applications, Volume II. Wiley, 1971

[17]

HIBBERT, D.B. Quality Assurance for the Analytical Chemistry Laboratory. Oxford University Press, Oxford, UK, 2007

[18]

IEC Guide 115, Application of uncertainty of measurement to conformity assessment activities in the electrotechnical sector

[19]

ISO 10576-1, Statistical methods - Guidelines for the evaluation of conformity with specified requirements - Part 1: General principles, 2003. International Standards Organization, Geneva

[20]

ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories

[21]

KORCZYNSKI, M.J., COX, M.G., AND HARRIS, P.M. Convolution and uncertainty evaluation. In Advanced Mathematical Tools in Metrology VII (Singapore, 2006), P. Ciarlini, E. Felipe, A. B. Forbes, and F. Pavese, Eds., World Scientific, pp. 188 - 195

[22]

MOHR, P.J., AND TAYLOR, B.N. CODATA recommended values of the fundamental physical constants: 2002. Rev. Mod. Phys. 76 (2004), 4

[23]

TAYLOR, B.N., AND KUYATT C.E. Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results. NIST Technical Note 1297, 1994

[24]

POSSOLO, A., AND TOMAN, B. Assessment of measurement uncertainty via observation equations. Metrologia 44 (2007), 464 - 475

[25]

RICE, J.R. Mathematical Statistics and Data Analysis, second ed. Duxbury Press, Belmont, Ca., USA, 1995

[26]

WEISE, K., AND W GER, W. A Bayesian theory of measurement uncertainty. Meas. Sci. Technol. 3 (1992), 1 - 11