ГОСТ Р ИСО 13628-4-2016. Национальный стандарт Российской Федерации. Нефтяная и газовая промышленность. Проектирование и эксплуатация подводных эксплуатационных систем. Часть 4. Подводное устьевое оборудование и фонтанная арматура

[1]

ISO 2859-1 <1>

Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection

--------------------------------

<1> На территории Российской Федерации действует ГОСТ Р ИСО 2859-1-2007 "Статистические методы. Процедуры выборочного контроля по альтернативному признаку. Часть 1. Планы выборочного контроля последовательных партий на основе приемлемого уровня качества", идентичный международному стандарту ИСО 2859-1:1999.

[2]

ISO 3183 <2>

Petroleum and natural gas industries - Steel pipe for pipeline transportation systems

--------------------------------

<2> На территории Российской Федерации действует ГОСТ ISO 3183-2012 "Трубы стальные для трубопроводов нефтяной и газовой промышленности. Общие технические условия", идентичный международному стандарту ИСО 3183:2007.

[3]

ISO 11961 <3>

Petroleum and natural gas industries - Steel drill pipe

--------------------------------

<3> На территории Российской Федерации действует ГОСТ Р 54383-2011 "Трубы стальные бурильные для нефтяной и газовой промышленности. Технические условия", который является модифицированным по отношению к международному стандарту ИСО 11961:2008.

[4]

ANSI/ASME B1.1

Unified Inch Screw Threads, UN and UNR Thread Form

[5]

ANSI/ASME B1.2

Gages and Gaging for Unified Inch Screw Threads

[6]

ANSI/ASME B18.2.2

Square and Hex Nuts (Inch Series)

[7]

ANSI/ISA 75.02 <4>

Control Valve Capacity Test Procedure

--------------------------------

<4> Данный ссылочный стандарт действует в редакции ANSI/ISA 75.02.01-2008 "Control Valve Capacity Test Procedures" (ANSI/ISA 75.02.01-2008 "Процедуры испытания пропускной способности управляющего клапана"). Для однозначного соблюдения требований настоящего стандарта рекомендуется использовать только данный ссылочный стандарт.

[8]

ANSI Y14.5M

Dimensioning and Tolerancing

[9]

ASME

Boiler and Pressure Vessel Code, Section III: Rules for Construction of Nuclear Power Plant components

[10]

ASME

Boiler and Pressure Vessel Code, Section V: Nondestructive Examination; Article 5: Ultrasonic examination methods for materials

[11]

ASME

Boiler and Pressure Vessel Code, Section VIII: Pressure Vessels; Division 1

[12]

ASME

Boiler and Pressure Vessel Code, Section VIII: Pressure Vessels; Division 2: Alternative Rules

[13]

ASME

Boiler and Pressure Vessel Code, Section IX: Welding and Brazing Qualifications

[14]

ASTM A193/A193M

Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications

[15]

ASTM A194/194M

Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

[16]

ASTM A307

Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength

[17]

ASTM A320/320M

Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service

[18]

ASTM A370

Standard Test Methods and Definitions for Mechanical Testing of Steel Products

[19]

ASTM A388

Standard Practice for Ultrasonic Examination of Steel Forgings

[20]

ASTM A453/453

Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels

[21]

ASTM A609/609M

Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof

[22]

ASTM 2990

Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics

[23]

ASTM D3045

Standard Practice for Heat Aging of Plastics Without Load

[24]

ASTM E10

Standard Test Method for Brinell Hardness of Metallic Materials

[25]

ASTM E18

Standard Test Methods for Rockwell Hardness of Metallic Materials

[26]

ASTM E92

Standard Test Method for Vickers Hardness of Metallic Materials

[27]

ASTM E94

Standard Guide for Radiographic Examination

[28]

ASTM E140

Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness

[29]

ASTM E165

Standard Practice for Liquid Penetrant Examination for General Industry

[30]

ASTM E280

Standard Reference Radiographs for Heavy-Walled (4 1/2 to 12-in. (114 to 305-mm) Steel Castings

[31]

ASTM E428

Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Used in Ultrasonic Testing

[32]

ASTM E446

Standard Reference Radiographs for Steel Castings Up to 2 in. (51 mm) in Thickness

[33]

ASTM E709

Standard Guide for Magnetic Particle Testing

[34]

ASTM E747

Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology

[35]

API TR 6J1

Elastomer Life Estimation Testing Procedures

[36]

ISA

Handbook of Control Valves

[37]

MSS SP-55

Quality Standard for Steel Castings for Valves, Flanges and Fittings and Other Piping Components - Visual Method for Evaluation of Surface Irregularities

[38]

MIL-STD 120

Gage Inspection

[39]

NACE RP0176

Standard Recommended Practice for Corrosion Control of Steel Fixed Offshore Platforms Associated with Petroleum Production

[40]

NORSOK M710 <*>

Qualification of Non-Metallic Sealing Materials and Manufacturers

--------------------------------

<*> Данный документ будет заменен на [52].

[41]

ASNT SNT-TC-1A

Recommended Practice No. SNT-TC-1A - Non-Destructive Testing

[42]

UL 746B

Polymeric Materials - Long Term Property Evaluations

[43]

SAE/AS 4059

Aerospace Fluid Power - Cleanliness Classification for Hydraulic Fluids

[44]

API Spec 17D

Specification for Subsea Wellhead and Christmas Tree Equipment

[45]

API TR 17TR3

Evaluation of the Risks and Benefits of Penetrations in Subsea Wellheads Below the BOP Stack

[46]

API RP 90

Recommended Practice for Annular Casing Pressure Management for Offshore Wells

[47]

ANSI/NACE MR0175/ISO 15156

Petroleum and Natural Gas Industries - Materials for Use in H2S containing Environments in Oil and Gas Production - Part 1, Part 2, and Part 3

[48]

ANSI/AWS D1.1 <**>

Structural Welding Code - Steel

--------------------------------

<**> Данный ссылочный стандарт заменен на ANSI/AWSD1.1/D1.1M "Structural Welding Code - Steel" (ANSI/AWSD1.1/D1.1M "Нормы и правила сварки конструкций. Сталь"). Для однозначного соблюдения требований настоящего стандарта рекомендуется использовать только данный ссылочный стандарт.

[49]

API RP 6HT

Heat Treatment and Testing of Large Cross Section and Critical Section Components

[50]

ISO 10426 (all parts) <***>

Petroleum and natural gas industries - Cements and materials for well cementing (ИСО 10426 (все части) Нефтяная и газовая промышленность. Цементы и материалы для цементирования скважин)

--------------------------------

<***> Переводы части 1 "Технические условия" и части 2 "Испытания скважинных цементов" находятся в Федеральном информационном фонде технических регламентов и стандартов.

[51]

DNV 2.7-1

Standard for Certification of Offshore Containers

[52]

ISO 23936 (all parts) <****>

Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production

--------------------------------

<****> Часть 1 "Термопласты" и часть 2 "Эластомеры" опубликованы, части 3 - 5 находятся в разработке.