ГОСТ Р МЭК 62508-2014. Национальный стандарт Российской Федерации. Менеджмент риска. Анализ влияния на надежность человеческого фактора

БИБЛИОГРАФИЯ

IEC 60812:2006	Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
HF-STD-001:2002	Human Factors Design Standard (HFDS), Federal Aviation Administration
HFDG, 1996	FAA Human Factors Design Guide - For Acquisition of Commercial-Off-The-Shelf Subsystems, Non-developmental Items, and Development Systems, DOT/FAA/CT-96/1. Federal Aviation Administration
MIL-HDBK-46855A:1999	Human Engineering Program Process and Procedures. Department of Defense
MIL-HDBK-1472F:1998	Human Engineering Design Criteria. Department of Defense
MIL-HDBK-1908B:1999	Definitions of Human Factors Terms. Department of Defense
Wallace, D.F.; Winters, J.; Dugger, M.; and Lackie, J.: 2001, "Human Systems Engineering: Understanding the Process of Engineering the Human into the System"; Naval Surface Warfare Center Dahlgren Division Technical Report NSWCDD/TR-01/101; November, 2001
NASA, Man-Systems Integration Standards, NASA-STD-3000, Volume I and II (1995)
FAA, Guidelines for Human Factors Requirements Development, AAR-100 (2004)
ISO/PAS 18152:2003	Ergonomics of human-system interaction - Specification for the process assessment of human-system issues
ISO 6385:2004	Ergonomic principles in the design of work systems
ISO 9000:2005	Quality management systems - Fundamentals and vocabulary
ISO 9241-1:1997	Ergonomic requirements for office work with visual display terminals (VDTs) - Part 1: General introduction
ISO 9241-2:1992	Ergonomic requirements for office work with visual display terminals (VDTs) - Part 2: Guidance on task requirements
ISO 9241-3:1992	Ergonomic requirements for office work with visual display terminals (VDTs) - Part 3: Visual display requirements W 2008-11-14
ISO 9241-4:1998	Ergonomic requirements for office work with visual display terminals (VDTs) - Part 4: Keyboard requirements
ISO 9241-5:1998	Ergonomic requirements for office work with visual display terminals (VDTs) - Part 5: Workstation layout and postural requirements
ISO 9241-6:1999	Ergonomic requirements for office work with visual display terminals (VDTs) - Part 6: Guidance on the work environment
ISO 9241-7:1998	Ergonomic requirements for office work with visual display terminals (VDTs) - Part 7: Requirements for display with reflections W 2008-11-14 electronic visual displays
ISO 9241-8:1997	Ergonomic requirements for office work with visual display terminals (VDTs) - Part 8: Requirements for displayed colours W 2008-11-14
ISO 9241-9:2000	Ergonomic requirements for office work with visual display terminals (VDTs) - Part 9: Requirements for non-keyboard input devices
ISO 9241-11:1998	Ergonomic requirements for office work with visual display terminals (VDTs) - Part 11: Guidance on usability
ISO 9241-12:1998	Ergonomic requirements for office work with visual display terminals (VDTs) - Part 12: Presentation of information
ISO 9241-13:1998	Ergonomic requirements for office work with visual display terminals (VDTs) - Part 13: User guidance
ISO 9241-14:1997	Ergonomic requirements for office work with visual display terminals (VDTs) - Part 14: Menu dialogues
ISO 9241-15:1997	Ergonomic requirements for office work with visual display terminals (VDTs) - Part 15: Command dialogues
ISO 9241-16:1999	Ergonomic requirements for office work with visual display terminals (VDTs) - Part 16: Direct manipulation dialogues
ISO 9241-17:1998	Ergonomic requirements for office work with visual display terminals (VDTs) - Part 17: Form filling dialogues
ISO 9241-20:2008	Ergonomics of human-system interaction - Part 20: Accessibility guidelines for information/communication technology (ICT) equipment and services
ISO 9241-110:2006	Ergonomics of human-system interaction - Part 110: Dialogue principles
ISO 9241-151:2008	Ergonomics of human-system interaction - Part 151: Guidance on World Wide Web user interfaces
ISO 9241-171:2008	Ergonomics of human-system interaction - Part 171: Guidance on software accessibility
ISO 9241-210:-	Ergonomics of human-system interaction - Part 210: Human-centred design for interactive systems
ISO 9241-300:2008	Ergonomics of human-system interaction - Part 300: Introduction to electronic visual display requirements
ISO 9241-302:2008	Ergonomics of human-system interaction - Part 302: Terminology for electronic visual displays
ISO 9241-303:2008	Ergonomics of human-system interaction - Part 303: Requirements for electronic visual displays
ISO 9241-304:2008	Ergonomics of human-system interaction - Part 304: User performance test methods for electronic visual displays
ISO 9241-305:2008	Ergonomics of human-system interaction - Part 305: Optical laboratory test methods for electronic visual displays
ISO 9241-306:2008	Ergonomics of human-system interaction - Part 306: Field assessment methods for electronic visual displays
ISO 9241-307:2008	Ergonomics of human-system interaction - Part 307: Analysis and compliance test methods for electronic visual displays
ISO 9241-308:2008	Ergonomics of human-system interaction - Part 308: Surfaceconduction electron-emitter displays (SED)
ISO 9241-309:2008	Ergonomics of human-system interaction - Part 309: Organic lightemitting diode (OLED) displays
ISO 9241-400:2007	Ergonomics of human-system interaction - Part 400: Principles and requirements for physical input devices
ISO 9241-410:2008	Ergonomics of human system interaction - Part 410: Design criteria for physical input devices
ISO 9241-920:2009	Ergonomics of human-system interaction - Part 920: Guidance on tactile and haptic interactions
ISO 11064-1	Ergonomic design of control centres - Part 1: Principles for the design of control centres
ISO 11064-2	Ergonomic design of control centres - Part 2: Principles for the arrangement of control suites
ISO 11064-3	Ergonomic design of control centres - Part 3: Control room layout
ISO 11064-4	Ergonomic design of control centres - Part 4: Layout and dimensions of workstations
ISO 11064-5	Ergonomic design of control centres - Part 5: Displays and controls
ISO 11064-6	Ergonomic design of control centres - Part 6: Environmental requirements for control centres
ISO 11064-7	Ergonomic design of control centres - Part 7: Principles for the evaluation of control centres
ISO/PAS 18152:2003	Ergonomics of human-system interaction - Specification for the process assessment of human-system issues
ISO/TR 18529:2000	Ergonomics - Ergonomics of human-system interaction - Humancentred lifecycle process descriptions
ISO/IEC 24765	Systems and software engineering - Vocabulary
ISO/IEC DIS TR 25060	Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Common Industry Format (CIF) for usability - General framework for usability-related information

Анализ надежности человеческого фактора (HRA)

ASEP: Swain, A.D. (1987) Accident Sequence Evaluation Program on Human Reliability Analysis Procedure. NUREG/CR-4772. NRC. Washington DC

ATHEANA: NUREG-1624:2000, Technical Basis and Implementation Guidelines for A Technique for Human Event Analysis (ATHEANA). NRC. Washington DC. Rev. 1

CAHR: , O.: 2005, Cognition and safety - An Integrated Approach to Systems Design and Performance Assessment. Ashgate. Aldershot. (ISBN 0754643255)

CREAM: Hollnagel, E.: 1998, Cognitive Reliability and Error Analysis Method - CREAM. Elsevier. New York, Amsterdam. (ISBN 0-08-042848-7)

ESAT: Brauser, K.: 1992, ESAT - Ein neues Verfahren zur der menschlichen . In: , K. (Hrsg.) Menschliche . DGLR-Bericht 92-04. DGLR. Bonn

HCR/ORE: Moieni, P., Spurgin, A.J. & Singh, A.: 1994, Advances in Human Reliability Analysis Methodology. Part I: Frameworks, Models and Data. Reliability Engineering and System Safety. Vol. 44. Elsevier, p. 27

Kirwan, B.: 1994, A Guide To Practical Human Reliability Assessment. CRC

MERMOS: Le Bot, P., Desmares, E. & Bieder, C.: 1998, MERMOS: an EDF project to update Human Reliability Assessment methodologies. In: Lydersen, S., Hansen, G., Sandtorv, H. (1998) Safety and Reliability. ESREL'98, Trondheim/Norway. A.A. Balkema. Rotterdam, p. 767 ff

SLIM: Embrey, D., Humphreys, P., Rosa, E.A., Kirwan, B. & Rea, K.: 1984, SLIMMAUD - An Approach to Assessing Human Error Probabilities Using Structured Expert Judgement. NUREG/CR-3518. NRC. Washington DC

SPAR-H: Byers, I.C., Gertman, D.I., Hill, S.G., Blackman, H.S., Gentillon, C.D., Hallbert, B.P. & Haney, L.N.: 2000, SPAR HRA Methodology: Comparison with other HRA methods. International Ergonomics - IEA 2000. San Diego. Human Factors and Ergonomics Society. Santa Monica CA. Published by: Mira Digital Publishing. South Jefferson, St. Lois, MO (www.miracd.com)

THERP: Swain, A.D. & Guttmann, H.E.: 1983, Handbook of Human Reliability Analysis with emphasis on nuclear power plant applications. Sandia National Laboratories, NUREG/CR-1278. Washington DC

Williams, J.C.: 1988, HEART - A data-based method for assessing and reducing human error to improve operational performance. In: Proceedings of the IEEE Conference on Human Factors and Power Plants. Monterey, CA. June 1988. P. 436 - 450.